The AED Audio Flex6 is a multipurpose loudspeaker cabinet, useable in a variety of applications.
Firstly, the AED Audio Flex6 cabinet can be mounted on a speaker stand for full-range applications. Secondly, column arrays can be created using multiple cabinets in a vertical stack. Thirdly, by using the specially-designed flying hardware, up to 16 cabinets can flown as a line array. Finally, Flex6 cabinets can be used in conjunction with the Solid-15 or Solid-18 subs to make a sub-top combination.
The Flex6 is the most efficient and versatile loudspeaker product on the market today.
The AED Audio Flex6 loudspeaker cabinet features 2 x 6.5″ neodymium LF drivers and a 1.4″ HF horn with a 3″ voice coil. The frequency response is 65Hz -18khz. The innovative feature that enables the Flex6 to stand out from other products on the market is the rotatable HF horn. The horn is easily rotatable between vertical and horizontal orientation without having to use tools. This gives a dispersion of 15 degrees (V) x 110 degrees (H) for line array applications, and then 110 degrees (V) x 15 degrees (H) for full range applications.
The class D power amplifier fitted in the Flex6 is rated at 1300w RMS. The maximum rated SPL is 130dB
Connections-wise, the AED Audio Flex6 has two XLR/Jack combo sockets, with two XLRM for signal loop through. A level control is supplied for each input, and there’s also a mix out XLR. Audio over IP is catered for with a 4×4 Dante network interface. Finally, there’s a multicast Bluetooth receiver/sender for wireless connections to the FLEX6
The cabinet dimensions are a very manageable 220mm (H) x 580mm (W) x 370mm (D) and the weight is 20kg. A range of rigging accessories have been developed for the FLEX6, and these are available to hire from Press Red Rentals
To hire the AED Audio Flex6, please book online or get in touch